Jet Pump

Product Detail

JET PUMP



Applications:

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.

The self-priming jet pumps are designed to pump water even in cases where air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure sets, and for the irrigation of gardens and allotments, etc.

The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.




Operating Conditions

Liquid temperature up to 60?

Ambient temperature up to 40?

Total suction lift up to 8m. 




Motor

Two-pole induction motor (n=2850 r.p.m)

Insulation Class B

Protection IP44

Continuous service S1

Thermal protector for single phase

Single phase 220V/50Hz, 60Hz if request

Three phase 380V/50Hz, 60Hz if request 




Component Construction

Pump body: Cast iron

Pump support: Cast iron

Motor housing: Aluminum

Impeller: Brass, PPO or Noryl if request

Diffuser: Noryl or PPO if request

Motor shaft: Carbon steel, AISI420/304 SS if request

Mechanical seal: Ceramic/Graphite




Options on request:

Different cable length

Can be connected with a pressure controller

Can be assembled with a tank system

Voltage and Frequency 50Hz or 60Hz




Warranty:1 year

(according to our general sales conditions).



NO	TYPE	Power		Max.head	Max.flow	Max.suct	Inlet/outlet	Packing dimension
		(KW)	(HP)	(m)	(L/min)	(m)	(Inch)	(mm)
A	JET60	0.37	0.5	35	40	9	1”X1”	455X190X215
B	JET80	0.55	0.75	42	42	9	1”X1”	455X190X215
C	JET100	0.75	1	50	50	9	1”X1”	455X190X215